|From Rahul kumar to everyone в 14:31, 30/10/18
Reply in new thread
To reset the printer, unplug the power from the wall while the printer is on.
Wait for some time, at least 30-40 seconds and plug it back into the wall again.
If the printer does not turn on, turn it on and wait for it to go through all of its setup steps. This sometimes clears out the Error Code 0x07a74dd6.
Related Blog: How To Fix Printer Error Code 0x610000f6 ?
Method 3:- Clean Print Head
You should try to manually clean the print heads and solve the error. Then take the print head out and clean contacts with lint free cloth and water.
Follow these steps:-
Unplug the power cable of the Printer.
Then open the printer.
Next, push the whole print head mechanic to the center
While the printer still open, plug the power and turn it ON.
Once the printhead still moving and is going to the very LEFT, close the cover.
Wait for some time, until its boot up.
Also, verify that it’s correct cartridge for your printer or not.
After performing all the methods, your problem will surely fix.
If you need any doubt the above-mentioned steps, then contact Customer service team for immediate assistance.